Research Interests
-
CAD/CAM/CAE, geometric
modeling, computational geometry, differential geometry, computer
graphics, meshing,
reverse engineering, NC machining, line heating.
Education
- Ph.D. in Computer Aided Design and Manufacturing, June 1993
- Massachusetts Institute of
Technology, Cambridge, Massachusetts
- Thesis: Robust Computational Methods for Shape
Interrogation
( PDF
(750 Kbytes) )
- Ocean Engineer's Degree in Ocean Engineering, June 1987
- Massachusetts Institute of Technology, Cambridge, Massachusetts
- Thesis: Dynamic and Fatique Analysis of Compliant Risers
- M.S. in Mechanical Enegineering, March 1978
- Waseda University, Tokyo, Japan
- Thesis: Analysis of Lunate-Tail Swimming Propulsion
- B.S. in Mechanical Enegineering, March 1976
- Waseda University, Tokyo, Japan
- Thesis: Attitude Control System of Under-Water Vehicle
Professional Experience
- Professor,
Mechanical Engineering, Yokohama National University
- 2003 - Present
- Lecturer,
MIT
- 2003 - Present
- Principal Research Scientist,
MIT
- 1999 - 2003
- Research Scientist and Lecturer,
MIT
- 1994 - 1999
- Postdoctoral Associate,
MIT
- 1993 - 1994
- Research Assistant,
MIT
- 1989 - 1993
- Senior Engineer, Bridgestone Corporation
- 1978 - 1989
Consultant
NK-EXA Corporation, Kawasaki
Japan
- 1998 - 2000
Books
- "Shape Interrogation for Computer Aided Design and Manufacturing"
by N. M. Patrikalakis and T. Maekawa. Heidelberg, Germany: Springer
Verlag, February 2002. ISBN 3-540-42454-7.
( Cover )
Chapter of Books
- "Intersection Problems" by N. M. Patrikalakis and T. Maekawa.
Handbook of Computer Aided Geometric Design, Chapter 25. G Farin,
J. Hoschek, and M. -S. Kim editors, Amsterdam: Elsevier Science
Publisher, 2002.
Papers in Refereed Journals
- "Surface Construction by Fitting Unorganized Curves" by
T. Maekawa and K. H. Ko. , Graphical Models . To appear.
- "Self-Intersections of Offset Curves and Surfaces" by J. Wallner,
T. Sakkalis, T. Maekawa, H. Pottmann, G. Yu, International Journal
of Shape Modeling, Vol. 7 No. 1 pages 1-21, June 2001.
- "Efficient Simulation of Shell Forming by Line Heating" by G. Yu,
R. J. Anderson, T. Maekawa and N. M. Patrikalakis, International
Journal of Mechanical Sciences, Vol. 43 No. 10 pages 2349-2370,
October 2001.
- "FEM Simulation of Laser Forming of Metal Plates" by G. Yu,
K. Masubuchi, T. Maekawa and N. M. Patrikalakis, Journal of
Manufacturing Science and Engineering, ASME Transactions , Vol. 123,
No. 3 pages 405-410, August 2001.
- "CNC Tool Path in terms of B-Spline Curves" by
C. Lartigue, F. Thiebaut and T. Maekawa, Computer Aided
Design, Vol. 33 No. 4 pages 307-319, 2001.
- "Optimal Development of Doubly Curved Surfaces" by
G. Yu, N. M. Patrikalakis and T. Maekawa, Computer Aided
Geometric Design, Vol. 17 No. 6 pages 545-577, 2000.
- "Differential Geometry of Intersection Curves of Two Surfaces"
by X. Ye and T. Maekawa, Computer Aided
Geometric Design, Vol. 16 No. 8 pages 767-788, 1999.
- "An Overview of Offset Curves and Surfaces" by T. Maekawa,
Computer Aided Design, Vol. 31 No. 3 pages 165-173, 1999.
- "Topologically Reliable Approximation of Trimmed Polynomial
Surface Patches" by W. Cho, T. Maekawa, N. M. Patrikalakis,
J. Peraire, Graphical Model and Image Processing, Vol. 61 No. 2 pages
84-109, 1999.
- "Design and Tessellation of B-Spline Developable Surfaces" by
T. Maekawa, J. S. Chalfant, Journal of
Mechanical Design, ASME Transactions, Vol. 120 No.3 pages 453-461, 1998.
- "Design for Manufacturing Using B-Spline Developable Surfaces" by
J. S. Chalfant, T. Maekawa, Journal of
Ship Research , Vol. 42 No. 3 pages 206-214, 1998.
- "Computation of Inflection Lines and Geodesics on Developable
Surfaces" by T. Maekawa, J. S. Chalfant, Mathematical Engineering
in Industry , Vol. 7 No. 2 pages 251-267, 1998.
- "Analysis and Application of Pipe Surfaces" by T. Maekawa,
T. Sakkalis, G. Yu and N. M. Patrikalakis, Computer Aided Geometric
Design , Vol. 15 No. 5, pages 437-458, 1998.
- "Self-intersections of Offsets of Quadratic
Surfaces: Part I, Explicit Surfaces" by T. Maekawa,
Engineering with Computers, Vol. 14, pages 1-13, 1998.
- "Self-intersections of Offsets of Quadratic
Surfaces: Part II, Implicit Surfaces" by T. Maekawa,
Engineering with Computers, Vol. 14, pages 14-22, 1998.
- "Efficient and Reliable Methods for Rounded Interval
Arithmetic'' by S. L. Abrams, W. Cho, C.-Y. Hu, T. Maekawa,
N. M. Patrikalakis, E. C. Sherbrooke and X. Ye,
Computer Aided Design, Vol. 30 No. 8 pages 657-665, 1998.
- "Computation of Self-intersections of Offsets of Bezier Surface
Patches" by T. Maekawa, W. Cho, N. M. Patrikalakis, Journal of
Mechanical Design, ASME Transactions, Vol. 119 No. 2,
pages 275-283, June 1997.
- "Approximation of Measured Data with Interval B-Splines" by
S. T. Tuohy, T. Maekawa, G. Shen N. M. Patrikalakis, Computer Aided
Design, Vol. 29 No. 11 pages 791-799, November 1997.
- "Robust Interval Algorithm for Surface Intersections" by C.-Y. Hu,
T. Maekawa, N. M. Patrikalakis, X. Ye, Computer Aided Design,
Vol. 29 No. 9 pages 617-627, September 1997.
- "Computation of Shortest Paths on Free-Form Parametric
Surfaces" by T. Maekawa, Journal of Mechanical Design, ASME
Transactions, Vol. 118 No. 4 pages 499-508, December 1996.
- "Umbilics and Lines of Curvature for Shape Interrogation" by T.
Maekawa, F. -E. Wolter and N. M. Patrikalakis, Computer Aided
Geometric Design, Vol. 13 No. 2, pages 133-161, March 1996.
- "Topologically Reliable
Approximation of Composite Bezier Curves" by W. Cho, T. Maekawa,
N. M. Patrikalakis, Computer Aided
Geometric Design, Vol. 13 No. 6 pages 497-520, August 1996.
- "Robust Interval Algorithm for Curve Intersections" by C. -Y Hu, T.
Maekawa, E. C. Sherbrooke, N. M. Patrikalakis, Computer Aided
Design, Vol. 28 No. 6/7 pages 495-506, June/July 1996.
- "Interrogation of Differential Geometry Properties for Design and
Manufacture" by T. Maekawa and N. M. Patrikalakis, The Visual
Computer, Vol. 10 No.4 pages 216-237, March 1994.
- "Computation of Singularities and Intersections of Offsets of Planar
Curves" by T. Maekawa and N. M. Patrikalakis, Computer Aided
Geometric Design, Vol. 10 No. 5 pages 407-429, October 1993.
- "Theoretical and Experimental Prediction of the Response of Compliant
Risers" by N. M. Patrikalakis, T. Maekawa, G. A. Kriezis and H. N.
Gursoy, Journal of Offshore Mechanics and Arctic Engineering,
ASME Transactions, Vol. 112 No. 3 pages 244-252, 1990.
- "Dynamics of Compliant Risers" by N. M. Patrikalakis, G. A. Kriezis,
H. N. Gursoy and T. Maekawa, Journal of Ship Research, Vol. 34 No. 2
pages 123-135, June 1990.
Proceedings of Refereed Conferences
- "Robust Tessellation of Trimmed Rational B-Spline Surface
Patches" by W. Cho, T. Maekawa, N. M. Patrikalakis, J. Peraire, In
F.-E. Wolter and N. M. Patrikalakis Editors, Proceedings of Computer Graphics International, CGI '98. Los
Alamitos, CA: IEEE, pages 543--555, June 1998.
Proceedings of Unrefereed Conferences
- "A Finite Element Model for Metal Forming by Laser Line Heating"
by G. Yu, K. Masubuchi, T. Maekawa, and N. M. Patrikalakis, In
C. Chryssostomidis and K. Johansson Editors, Proceedings of the
10th International Conference on Computer Applications in
Shipbuilding, ICCAS '99, Volume 2. MIT, Cambridge, MA: MIT Sea
Grant Publication, pages 409-418, June 1999.
- "Interrogation of Geophysical Maps with Uncertainty for AUV
Micro-Navigation" by S. T. Tuohy, T. Maekawa, N. M. Patrikalakis, In
Engineering with the Ocean, Proceedings of Oceans '93, Victoria
Canada. IEEE Oceanic Engineering Society, October 1993.
- "Computation of Singularities for Engineering Design" by N. M.
Patrikalakis, T. Maekawa, E. C. Sherbrooke, J. Zhou. In T. L. Kunii,
and Y. Shinagawa Editors, Invited paper in Modern Geometric
Computing for Visualization, pages 167-191. Tokyo: Springer-Verlag,
June 1992.
Internal Memoranda
Dr. Takashi Maekawa
Department of Ocean Engineering
77 Massachusetts Avenue, Room 5-426A
Cambridge, MA 02139-4307
(617) 253-6762
tmaekawa@mit.edu
URL: http://deslab.mit.edu/DesignLab/people/Maekawa.html
Last modified: November 15, 2002